top of page

Load data for .260 PICRA + .264 | 107gr | Sierra HPBT MatchKing

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 107gr | Sierra HPBT MatchKing

Load Specifications

Bullet:
.264 | 107gr | Sierra HPBT MatchKing
Manufacturer SKU:
1715
Bullet Weight:
107gr | 6.9g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.225" | 31.1mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.404" | 61.1mm
Seated Depth:
0.336" | 8.5mm
Shank Seated Depth:
0.136" | 3.4mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B5802_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 64 loads in caliber .260 PICRA with .264 | 107gr | Sierra HPBT MatchKing bullet and 32 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
71%
50894
90%
**24
100%
ADI APS 350
<<locked>>
75%
50560
89%
**21
101%
ADI APS 450
<<locked>>
74%
50270
89%
**27
100%
ADI AS 30
<<locked>>
70%
50430
89%
**53
100%
ADI AS 50N
<<locked>>
63%
50372
89%
**76
100%
Accurate 4100 👍
<<locked>>
65%
50444
89%
**13
99%
Accurate No. 11 FS
<<locked>>
71%
50343
89%
**36
96%
Accurate Solo 1000
<<locked>>
66%
49269
87%
**57
100%
Accurate Solo 1250
<<locked>>
65%
49545
88%
**80
100%
Alliant BLUE DOT
<<locked>>
67%
50096
89%
**86
100%
Baschieri & Pellagri 100
<<locked>>
65%
49980
88%
**50
100%
Hodgdon Clays
<<locked>>
73%
50285
89%
**21
100%
Hodgdon H110
<<locked>>
67%
50067
89%
**32
98%
Hodgdon LilGun
<<locked>>
66%
49966
88%
**19
100%
Hodgdon TrailBoss
<<locked>>
96%
31386
55%
**78
100%
Maxam CSB 1
<<locked>>
68%
49806
88%
**83
100%
Maxam CSB 2
<<locked>>
63%
49327
87%
**57
100%
Maxam CSB 3
<<locked>>
66%
50082
89%
**63
100%
Maxam CSB 4
<<locked>>
66%
50270
89%
**63
100%
Maxam CSB 5
<<locked>>
65%
49255
87%
**24
100%
ReloadSwiss RS 14
<<locked>>
94%
30560
54%
**84
100%
ReloadSwiss RS 30
<<locked>>
80%
49763
88%
**36
99%
SNPE Vectan A0
<<locked>>
66%
49879
88%
**16
100%
SNPE Vectan BA10
<<locked>>
68%
49458
87%
**21
100%
SNPE Vectan BA6 1/2 👍
<<locked>>
84%
49879
88%
**96
100%
SNPE Vectan BA7 1/2
<<locked>>
66%
50763
90%
**65
100%
Somchem S265
<<locked>>
77%
50778
90%
**29
98%
Vihtavuori 3N38
<<locked>>
63%
49443
87%
**34
100%
Vihtavuori N105
<<locked>>
65%
50314
89%
**44
100%
Vihtavuori N110 👍
<<locked>>
75%
49371
87%
**16
100%
Vihtavuori N32C Tin Star
<<locked>>
88%
50024
88%
**07
100%
Winchester 296
<<locked>>
66%
50662
90%
**42
95%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
39465
70%
**73
100%
ADI APS 350
<<locked>>
61%
38493
68%
**63
100%
ADI APS 450
<<locked>>
61%
38812
69%
**89
100%
ADI AS 30
<<locked>>
61%
41568
73%
**42
100%
ADI AS 50N
<<locked>>
61%
48501
86%
**50
100%
Accurate 4100
<<locked>>
61%
44512
79%
**44
98%
[Accurate No. 11 FS]*
<<locked>>
61%
35433
63%
**90
89%
Accurate Solo 1000
<<locked>>
61%
43990
78%
**88
100%
Accurate Solo 1250
<<locked>>
61%
45803
81%
**34
100%
Alliant BLUE DOT
<<locked>>
61%
42206
75%
**68
100%
Baschieri & Pellagri 100
<<locked>>
61%
46427
82%
**07
100%
Hodgdon Clays
<<locked>>
61%
39624
70%
**89
100%
Hodgdon H110
<<locked>>
61%
41640
74%
**11
95%
Hodgdon LilGun
<<locked>>
61%
42511
75%
**14
99%
Hodgdon TrailBoss
<<locked>>
62%
17492
31%
**2
100%
Maxam CSB 1
<<locked>>
61%
42801
76%
**98
100%
Maxam CSB 2
<<locked>>
61%
47543
84%
**44
100%
Maxam CSB 3
<<locked>>
61%
44701
79%
**01
100%
Maxam CSB 4
<<locked>>
61%
44846
79%
**04
100%
Maxam CSB 5
<<locked>>
61%
45687
81%
**85
100%
ReloadSwiss RS 14
<<locked>>
60%
17027
30%
**2
100%
ReloadSwiss RS 30
<<locked>>
61%
27528
49%
**65
90%
SNPE Vectan A0
<<locked>>
61%
44672
79%
**44
100%
SNPE Vectan BA10
<<locked>>
61%
42699
75%
**39
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
26527
47%
**02
96%
SNPE Vectan BA7 1/2
<<locked>>
61%
44106
78%
**96
100%
Somchem S265
<<locked>>
61%
31647
56%
**21
90%
Vihtavuori 3N38
<<locked>>
61%
46137
82%
**88
100%
Vihtavuori N105
<<locked>>
61%
45063
80%
**68
100%
Vihtavuori N110
<<locked>>
61%
32387
57%
**37
97%
Vihtavuori N32C Tin Star
<<locked>>
61%
29950
53%
**42
100%
Winchester 296
<<locked>>
61%
43323
77%
**44
93%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page